Barrier gate for standard parking applications - garages, surface lots, etc. with an arm up to 12 ft. (3.75m) long. Direct drive mechanism eliminates belts, chains, and other weaknesses common to other gates on the market. One standard, plug-in controller is used for all gates and all controllers are completely interchangeable reducing maintenance requirements and the need to stock parts.

UG-141 Specifications

Industrial gate for wide openings. Ideal for truck terminals, industrial plants, or areas used primarily by commercial vehicles where a wide roadway needs to be covered. Can be equipped with an aluminum arm up to 20ft. (6m) long. Uses the same direct drive mechanism as the Universal Gate. Options such as flashing warning lights are available.

PG-541 Specifications

The directional enforcer allows traffic to move in only one direction. Moving in the wrong direction will puncture the tires of a vehicle. Surface mount (DE-9600) and in-ground (DE-9601) units are available.

DE-9600 & DE-9601 Specifications

Ticket Issuing Machines TIM-20 & TIM-21

PPI offers 2 types of ticket machines: the TIM-20 issues a 2" by 5" paper ticket. This ticket is printed with the time and date and can also be printed with a bar code. Bar code encoded tickets can be read by the TPC-300/BC Fee Computer. The ticket printer is thermal so there are never any ribbons or ink cartridges to replace. Almost any custom message can be printed on the ticket. The TIM-21 issues a magnetic stripe ticket in standard credit card size format that can be read by the TPC-300/M Fee Computer. Both machines utilize the same electronic controls and are easily programmed through a hand held key pad.

TIM-20 Specifications
TIM-21 Specifications

Exit Reader for use in central or "time lag" systems. The TR-21 is used at the exits of a facility to read a validated ticket that was issued by the TIM-21 Ticket Machine. Tickets can be validated by the TPC-300/M Fee Computer or another mag stripe reader/writer. Validated tickets are pulled in and deposited into a discard bin. The TR-21 will work in conjunction with any gates, loop detectors or other parking equipment.

Single channel loop detector for detecting the presence of a vehicle over an in-ground sensor loop. Can be used in conjunction with almost any piece of parking equipment including gates, ticket machines, card readers, counters, etc.
Small, 6" x 3" x  2" plug in module with industry standard 11 pin connector.

The DC-1100 Differential Counter counts the number of free spaces in a parking facility. The counter has inputs for 4 entrances and 4 exits. When the number of free spaces reaches 0, the counter will switch on a full sign and turn off entrance equipment. Optionally, the counter can display the number of available spaces on a variable message sign.