The MCO-630 is a simple low cost magnetic card reader for facilities where a programmable system is not necessary. All cards are coded alike and any card will activate the reader. There is no limit to the number of users. Since the MCO-630 is activated by a magnetic card, it does not require power. A normally open contact is used to open gates and doors.

The SAC-4158 is a stand alone proximity card reader for facilities wanting control over users but where an on line system is not needed or is impractical. The SAC-4158 contains a non-volatile memory for 500 cards or users. Any card can be validated or invalidated using a hand held programmer. A relay provides a signal to open gates and doors.

SAC-4159 Smart Card Reader

The SAC-4159 is a programmable proximity card reader that can operate in an on line or off line mode. The unit is programmed via a PC. Any Windows PC can be used to program the reader using the included software. Features include an 8000 card capacity, 32 access levels, 32 time zones, user data base with names, addresses and phone numbers as well as anti-passback for parking applications. Once programmed, the reader retains all data in nonvolatile memory and will function without further intervention. Readers can also be on-line, either hard wired or through a wireless network. On-line readers can provide real time activity reports. Proximity readers with ranges of up to 15 feet are available.

SAC-4159 Specifications

The DBC-9029 is a single code keypad that offers an economical alternative to a card reader. The keypad is activated by a three, four, or five digit code. Codes can be changed at any time. A relay output opens gates and doors.

DBC-9029 Specifications